Telescoping Cylinder Test System
Telescoping Cylinder Test System
The Telescoping Cylinder Test System is a specialized testing solution designed for large hydraulic cylinders, particularly telescopic cylinders used in tower cranes.
It performs internal pressure, external leakage, and internal leakage tests under both low- and high-pressure conditions.
The system is equipped with a high-performance hydraulic unit and electronically controlled measurement system, enabling precise verification of cylinder performance, durability, and reliability.
Main Features
▶ Electronically Controlled Test System
12-inch display for setting and monitoring test conditions
Electronic management of test results
▶ Stable Hydraulic System Configuration
Precise control of pressure and flow via proportional valves
Stable pressure holding for more than 15 minutes
▶ Temperature Management System
Operating temperature maintained below 55°C
Heater installed for winter operation
▶ Maintenance Convenience
Easy filter inspection and replacement structure
Post-test residual pressure discharge circuit
Key Advantages
▶ Combined Low- and High-Pressure Testing Capability
Low pressure up to 400 bar
High pressure up to 800 bar
Compatible with various cylinder specifications and test conditions
▶ Precision Control and Measurement
Electronic control of pressure, time, stroke distance, and flow rate
Reliable test data acquisition and storage
▶ Comprehensive Leakage Testing
Internal pressure test
External leakage test
Internal leakage test
Leakage measurement resolution down to 0.05 ml
▶ Safety-Oriented Design
Emergency stop function and warning system
Operator safety ensured in high-pressure environments
Main Specifications
Dimensions: 2,460 × 920 × 1,870 mm
Operating Pressure: 800 / 1,600 / 2,500 PSI
Maximum Pressure: 2,500 PSI
Capacity: 350L or more
Power Supply: 440V / 3 Phase / 35kW
Filtration Performance: ≤ 3 microns
Motor Output: Combined 54HP
Pump Flow Rate: 35 GPM (132 L/min)
Applications & Benefits
▶ Tower Crane Telescopic Cylinder Performance Testing
Performance verification after manufacturing and maintenance
▶ Large Hydraulic Cylinder Quality Inspection
Reliability assurance through internal pressure and leakage testing
▶ Data-Based Quality Management
Test history tracking and quality traceability
▶ Failure Prevention
Early detection of potential defects through pre-delivery testing
Custom Manufacturing
This equipment can be customized according to required equipment type, operating pressure, flow rate, and filtration specifications. Design consultation is available to meet defense equipment operational requirements.
Inquiry
For specifications, custom production, and defense equipment applications regarding the Hydraulic Flushing Equipment (GA-HF-2500), please contact us at any time.